Filter olja 
Filter zraka 
Filter goriva 
Filter kabine 
Svečke in grelniki 
Metlice brisalcev 
Zavorni disk 
Disk ploščice 
Komplet zobatega jermena 
Luči vozil 
Komplet rebrastega jermena 
Črpalka za vodo 
Komplet sklopke 
Amortizerji 
Vzmet 
Obesa 
Gumijasti tepihi - tipska ponudba 
Ležaji kolesa 
Motorna olja in mazila 
Hladilna tekočina 
Kozmetika 
Oprema za vozila 
Aditivi 
Orodja 
CEVI HLAJENJA MOTORJA IN PRIROBNICE
Izbrano vozilo
Prikazani so rezultati za izbrano vozilo
NAJDENI IZDELKI
Cevi hlajenja motorja in prirobnice
- Blagovna znamka:VAICO
- Strana ugradnje:Izlazna strana
- Vod za hlađenje:od ekspanzijske posude prema hladnjaku motora
- Težina [kg]:0,24 kg
- Opće informacije:Products supplied by us are without exception intended for
the designated use.
Please note that our products are usually delivered without
installation instructions.
Installation may only be carried out by trained specialist
personnel.
There is no guarantee for inappropriate, improper or
unintended use.
, In the warranty, we always make a distinction between wear
parts and vehicle parts. All wear parts are subject to a
reduced warranty period and a maximum mileage.
Brake components such as brake disks, brake pads, etc.
maximum of 1000 km (break-in period). Therefore, warranty
claims for brake parts are only reviewed with an
installation invoice and a record of the wheel hub run-out
measurement, including photos.
For brake disks and brake pads, the break-in requirements
specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be
checked with regard to clearance and the wheel hub with
regard to wobble, and the appropriate documentation must be
produced.
If the vehicle is no longer in its original condition due to
tuning work such as wheel accessories and tracking plates,
the entitlement to make warranty claims is lost due to
third-party work. The same warranty claims are lost if the
vehicle is used for motor sports or similar events.
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
34,60
€
Sniženo:
23,53
€
Šifra:
VAI-V20-1474
Najniža cijena u zadnjih 30 dana:
23,53 €
- Blagovna znamka:VAICO
- Strana ugradnje:Izlazna strana
- Vod za hlađenje:od ekspanzijske posude prema hladnjaku motora
- Težina [kg]:0,24 kg
- Opće informacije:Products supplied by us are without exception intended for
the designated use.
Please note that our products are usually delivered without
installation instructions.
Installation may only be carried out by trained specialist
personnel.
There is no guarantee for inappropriate, improper or
unintended use.
, In the warranty, we always make a distinction between wear
parts and vehicle parts. All wear parts are subject to a
reduced warranty period and a maximum mileage.
Brake components such as brake disks, brake pads, etc.
maximum of 1000 km (break-in period). Therefore, warranty
claims for brake parts are only reviewed with an
installation invoice and a record of the wheel hub run-out
measurement, including photos.
For brake disks and brake pads, the break-in requirements
specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be
checked with regard to clearance and the wheel hub with
regard to wobble, and the appropriate documentation must be
produced.
If the vehicle is no longer in its original condition due to
tuning work such as wheel accessories and tracking plates,
the entitlement to make warranty claims is lost due to
third-party work. The same warranty claims are lost if the
vehicle is used for motor sports or similar events.
Cevi hlajenja motorja in prirobnice
- Blagovna znamka:VAICO
- Vod za hlađenje:od razdjelnog elementa prema cijevi za vodu
- Težina [kg]:0,133 kg
- Opće informacije:Products supplied by us are without exception intended for
the designated use.
Please note that our products are usually delivered without
installation instructions.
Installation may only be carried out by trained specialist
personnel.
There is no guarantee for inappropriate, improper or
unintended use.
, In the warranty, we always make a distinction between wear
parts and vehicle parts. All wear parts are subject to a
reduced warranty period and a maximum mileage.
Brake components such as brake disks, brake pads, etc.
maximum of 1000 km (break-in period). Therefore, warranty
claims for brake parts are only reviewed with an
installation invoice and a record of the wheel hub run-out
measurement, including photos.
For brake disks and brake pads, the break-in requirements
specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be
checked with regard to clearance and the wheel hub with
regard to wobble, and the appropriate documentation must be
produced.
If the vehicle is no longer in its original condition due to
tuning work such as wheel accessories and tracking plates,
the entitlement to make warranty claims is lost due to
third-party work. The same warranty claims are lost if the
vehicle is used for motor sports or similar events.
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
53,10
€
Sniženo:
36,11
€
Šifra:
VAI-V20-1309
Najniža cijena u zadnjih 30 dana:
36,11 €
- Blagovna znamka:VAICO
- Vod za hlađenje:od razdjelnog elementa prema cijevi za vodu
- Težina [kg]:0,133 kg
- Opće informacije:Products supplied by us are without exception intended for
the designated use.
Please note that our products are usually delivered without
installation instructions.
Installation may only be carried out by trained specialist
personnel.
There is no guarantee for inappropriate, improper or
unintended use.
, In the warranty, we always make a distinction between wear
parts and vehicle parts. All wear parts are subject to a
reduced warranty period and a maximum mileage.
Brake components such as brake disks, brake pads, etc.
maximum of 1000 km (break-in period). Therefore, warranty
claims for brake parts are only reviewed with an
installation invoice and a record of the wheel hub run-out
measurement, including photos.
For brake disks and brake pads, the break-in requirements
specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be
checked with regard to clearance and the wheel hub with
regard to wobble, and the appropriate documentation must be
produced.
If the vehicle is no longer in its original condition due to
tuning work such as wheel accessories and tracking plates,
the entitlement to make warranty claims is lost due to
third-party work. The same warranty claims are lost if the
vehicle is used for motor sports or similar events.
Cevi hlajenja motorja in prirobnice
- Blagovna znamka:TOPRAN
- Strana ugradnje:Hladnjak motora, gore
- Materijal:Guma s tekstilnim umetkom
- Izvedba crijeva:Oblikovano crijevo
- Dopunski artikl/dopunska informacija 2:s brzim spojkama
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
68,80
€
Sniženo:
46,78
€
Šifra:
TOP-502 180
Najniža cijena u zadnjih 30 dana:
46,78 €
- Blagovna znamka:TOPRAN
- Strana ugradnje:Hladnjak motora, gore
- Materijal:Guma s tekstilnim umetkom
- Izvedba crijeva:Oblikovano crijevo
- Dopunski artikl/dopunska informacija 2:s brzim spojkama
- Opće informacije:Any and all spare parts we supply are solely intended for
the designated purpose as defined by us.
Installation by trained personnel only.
Our products are usually supplied without assembly
instructions.
Installation in vehicles other than those specified by
us may lead to the exclusion of warranty.
Cevi hlajenja motorja in prirobnice
- Blagovna znamka:GATES
- Strana ugradnje:gore
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Boja:crna
- Duljina crijeva [mm]:337 mm
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
44,10
€
Sniženo:
29,99
€
Šifra:
GAT-05-2484
Najniža cijena u zadnjih 30 dana:
29,99 €
- Blagovna znamka:GATES
- Strana ugradnje:gore
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Boja:crna
- Duljina crijeva [mm]:337 mm
- Unutarnji promjer 1 [mm]:31 mm
- Unutarnji promjer 2 [mm]:31 mm
- Obratite pozornost na brošuru:
Cevi hlajenja motorja in prirobnice
- Blagovna znamka:GATES
- Vod za hlađenje:od hladnjaka za grijanje prema motoru
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Boja:crna
- Duljina crijeva [mm]:665 mm
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
37,70
€
Sniženo:
25,64
€
Šifra:
GAT-02-1775
Najniža cijena u zadnjih 30 dana:
25,64 €
- Blagovna znamka:GATES
- Vod za hlađenje:od hladnjaka za grijanje prema motoru
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Boja:crna
- Duljina crijeva [mm]:665 mm
- Unutarnji promjer 1 [mm]:21 mm
- Unutarnji promjer 2 [mm]:17,5 mm
- Obratite pozornost na brošuru:
Cevi hlajenja motorja in prirobnice
- Blagovna znamka:GATES
- Vod za hlađenje:od termostata prema pumpi za vodu
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Boja:crna
- Duljina crijeva [mm]:220 mm
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
30,70
€
Sniženo:
20,88
€
Šifra:
GAT-02-1670
Najniža cijena u zadnjih 30 dana:
20,88 €
- Blagovna znamka:GATES
- Vod za hlađenje:od termostata prema pumpi za vodu
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Boja:crna
- Duljina crijeva [mm]:220 mm
- Unutarnji promjer 1 [mm]:38 mm
- Unutarnji promjer 2 [mm]:38 mm
- Obratite pozornost na brošuru:
Cevi hlajenja motorja in prirobnice
Gibka cev hladilnika
- Blagovna znamka:FEBI BILSTEIN
- Strana ugradnje:gore
- Kôd motora:N54 B30 A
- Duljina [mm]:255 mm
- Vod za hlađenje:od motora prema hladnjaku motora
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
62,90
€
Sniženo:
42,77
€
Šifra:
FEB-45816
Najniža cijena u zadnjih 30 dana:
42,77 €
- Blagovna znamka:FEBI BILSTEIN
- Strana ugradnje:gore
- Kôd motora:N54 B30 A
- Duljina [mm]:255 mm
- Vod za hlađenje:od motora prema hladnjaku motora
- Materijal:EPDM (etilen-propilen-dien kaučuk), Plastika
- Težina [kg]:0,259 kg
- Dopunski artikl/dopunska informacija 2:s brzim spojkama
- Opće informacije:Proizvode koje isporučujemo treba koristiti samo u skladu
na prijedviđenom upotrebom. Ugradnju sme da obavlja samo
obučeno stručno osoblje. Proizvodi se po pravilu
isporučuju bez uputstva za montažu.
Cevi hlajenja motorja in prirobnice
Gibka cev hladilnika
- Blagovna znamka:FEBI BILSTEIN
- Duljina [mm]:585 mm
- Vod za hlađenje:od hladnjaka za grijanje prema motoru
- Materijal:EPDM (etilen-propilen-dien kaučuk), Plastika
- Težina [kg]:0,251 kg
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
37,80
€
Sniženo:
25,70
€
Šifra:
FEB-101057
Najniža cijena u zadnjih 30 dana:
25,70 €
- Blagovna znamka:FEBI BILSTEIN
- Duljina [mm]:585 mm
- Vod za hlađenje:od hladnjaka za grijanje prema motoru
- Materijal:EPDM (etilen-propilen-dien kaučuk), Plastika
- Težina [kg]:0,251 kg
- Opće informacije:Proizvode koje isporučujemo treba koristiti samo u skladu
na prijedviđenom upotrebom. Ugradnju sme da obavlja samo
obučeno stručno osoblje. Proizvodi se po pravilu
isporučuju bez uputstva za montažu.
Cevi hlajenja motorja in prirobnice
Gibka cev hladilnika
- Blagovna znamka:FEBI BILSTEIN
- Kôd motora:N54 B30 A
- Širina [mm]:280 mm
- Vod za hlađenje:od motora prema termostatu
- Duljina crijeva [mm]:470 mm
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
55,10
€
Sniženo:
37,47
€
Šifra:
FEB-100632
Najniža cijena u zadnjih 30 dana:
37,47 €
- Blagovna znamka:FEBI BILSTEIN
- Kôd motora:N54 B30 A
- Širina [mm]:280 mm
- Vod za hlađenje:od motora prema termostatu
- Duljina crijeva [mm]:470 mm
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Težina [kg]:0,284 kg
- Dopunski artikl/dopunska informacija:s brzom spojkom
- za OE broj:11 53 7 541 992
- Opće informacije:Proizvode koje isporučujemo treba koristiti samo u skladu
na prijedviđenom upotrebom. Ugradnju sme da obavlja samo
obučeno stručno osoblje. Proizvodi se po pravilu
isporučuju bez uputstva za montažu.
Cevi hlajenja motorja in prirobnice
Gibka cev hladilnika
- Blagovna znamka:FEBI BILSTEIN
- Strana ugradnje:desno dolje
- Duljina [mm]:255 mm
- Širina [mm]:235 mm
- Vod za hlađenje:od termostata prema hladnjaku motora
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
59,00
€
Sniženo:
40,12
€
Šifra:
FEB-100618
Najniža cijena u zadnjih 30 dana:
40,12 €
- Blagovna znamka:FEBI BILSTEIN
- Strana ugradnje:desno dolje
- Duljina [mm]:255 mm
- Širina [mm]:235 mm
- Vod za hlađenje:od termostata prema hladnjaku motora
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Težina [kg]:0,411 kg
- Dopunski artikl/dopunska informacija 2:s brzim spojkama
- Opće informacije:Proizvode koje isporučujemo treba koristiti samo u skladu
na prijedviđenom upotrebom. Ugradnju sme da obavlja samo
obučeno stručno osoblje. Proizvodi se po pravilu
isporučuju bez uputstva za montažu.
Cevi hlajenja motorja in prirobnice
- Blagovna znamka:ESEN SKV
- Duljina [mm]:585 mm
- Materijal:Plastika, EPDM (etilen-propilen-dien kaučuk)
- Vod za hlađenje:od hladnjaka za grijanje prema motoru
- Težina [kg]:0,3 kg
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
33,10
€
Sniženo:
22,51
€
Šifra:
ESE-43SKV635
Najniža cijena u zadnjih 30 dana:
22,51 €
- Blagovna znamka:ESEN SKV
- Duljina [mm]:585 mm
- Materijal:Plastika, EPDM (etilen-propilen-dien kaučuk)
- Vod za hlađenje:od hladnjaka za grijanje prema motoru
- Težina [kg]:0,3 kg
Cevi hlajenja motorja in prirobnice
- Blagovna znamka:VAICO
- Strana ugradnje:gore
- Vod za hlađenje:od termostata prema hladnjaku motora
- Težina [kg]:0,263 kg
- Opće informacije:Products supplied by us are without exception intended for
the designated use.
Please note that our products are usually delivered without
installation instructions.
Installation may only be carried out by trained specialist
personnel.
There is no guarantee for inappropriate, improper or
unintended use.
, In the warranty, we always make a distinction between wear
parts and vehicle parts. All wear parts are subject to a
reduced warranty period and a maximum mileage.
Brake components such as brake disks, brake pads, etc.
maximum of 1000 km (break-in period). Therefore, warranty
claims for brake parts are only reviewed with an
installation invoice and a record of the wheel hub run-out
measurement, including photos.
For brake disks and brake pads, the break-in requirements
specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be
checked with regard to clearance and the wheel hub with
regard to wobble, and the appropriate documentation must be
produced.
If the vehicle is no longer in its original condition due to
tuning work such as wheel accessories and tracking plates,
the entitlement to make warranty claims is lost due to
third-party work. The same warranty claims are lost if the
vehicle is used for motor sports or similar events.
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
58,20
€
Sniženo:
39,58
€
Šifra:
VAI-V20-1301
Najniža cijena u zadnjih 30 dana:
39,58 €
- Blagovna znamka:VAICO
- Strana ugradnje:gore
- Vod za hlađenje:od termostata prema hladnjaku motora
- Težina [kg]:0,263 kg
- Opće informacije:Products supplied by us are without exception intended for
the designated use.
Please note that our products are usually delivered without
installation instructions.
Installation may only be carried out by trained specialist
personnel.
There is no guarantee for inappropriate, improper or
unintended use.
, In the warranty, we always make a distinction between wear
parts and vehicle parts. All wear parts are subject to a
reduced warranty period and a maximum mileage.
Brake components such as brake disks, brake pads, etc.
maximum of 1000 km (break-in period). Therefore, warranty
claims for brake parts are only reviewed with an
installation invoice and a record of the wheel hub run-out
measurement, including photos.
For brake disks and brake pads, the break-in requirements
specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be
checked with regard to clearance and the wheel hub with
regard to wobble, and the appropriate documentation must be
produced.
If the vehicle is no longer in its original condition due to
tuning work such as wheel accessories and tracking plates,
the entitlement to make warranty claims is lost due to
third-party work. The same warranty claims are lost if the
vehicle is used for motor sports or similar events.
Cevi hlajenja motorja in prirobnice
- Blagovna znamka:MEYLE
- Strana ugradnje:gore
- Kôd motora:N54 B30 A
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Polazni/povratni vod:za polazni vod
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
62,20
€
Sniženo:
42,30
€
Šifra:
MEY-319 222 0026
Najniža cijena u zadnjih 30 dana:
42,30 €
- Blagovna znamka:MEYLE
- Strana ugradnje:gore
- Kôd motora:N54 B30 A
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Polazni/povratni vod:za polazni vod
- Dopunski artikl/dopunska informacija 2:s brzim spojkama
Cevi hlajenja motorja in prirobnice
- Blagovna znamka:GATES
- Vod za hlađenje:od motora prema termostatu
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Boja:crna
- Duljina crijeva [mm]:694 mm
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
32,20
€
Sniženo:
21,90
€
Šifra:
GAT-02-1784
Najniža cijena u zadnjih 30 dana:
21,90 €
- Blagovna znamka:GATES
- Vod za hlađenje:od motora prema termostatu
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Boja:crna
- Duljina crijeva [mm]:694 mm
- Unutarnji promjer 1 [mm]:24 mm
- Unutarnji promjer 2 [mm]:24 mm
- Obratite pozornost na brošuru:
Cevi hlajenja motorja in prirobnice
Gibka cev hladilnika
- Blagovna znamka:FEBI BILSTEIN
- Duljina [mm]:152 mm
- Širina [mm]:85 mm
- Vod za hlađenje:od termostata prema pumpi za vodu
- Materijal:EPDM (etilen-propilen-dien kaučuk)
Trenutna akcija traje do: 04.05.2024 00:00.
Cijena:
47,50
€
Sniženo:
32,30
€
Šifra:
FEB-100616
Najniža cijena u zadnjih 30 dana:
32,30 €
- Blagovna znamka:FEBI BILSTEIN
- Duljina [mm]:152 mm
- Širina [mm]:85 mm
- Vod za hlađenje:od termostata prema pumpi za vodu
- Materijal:EPDM (etilen-propilen-dien kaučuk)
- Težina [kg]:0,146 kg
- Opće informacije:Proizvode koje isporučujemo treba koristiti samo u skladu
na prijedviđenom upotrebom. Ugradnju sme da obavlja samo
obučeno stručno osoblje. Proizvodi se po pravilu
isporučuju bez uputstva za montažu.
KATEGORIJE IZDELKOV
- Aksialni ležaj ročične gredi
- Bregasta os
- Tesnilo glave motorja
- Popoln komplet tesnil motorja
- Tesnilo izpuha
- Tesnilo karterja
- Tesnilo pokrova razvoda
- Tesnilo pokrova ventila
- Tesnilo sesalne veje
- Glavni ležaj ročične gredi
- Hidravlični dvižnik
- Karike
- Zaklopka
- Bat
- Ohišje filterja za gorivo
- Ohišje filterja za olje
- Ohišje filterja za zrak
- Leteči ležaj na ročični gredi
- Črpalka za olje
- Ročična gred
- Izpušni ventili
- Sesalni ventili
- Vijaki za pritrjevanje glave cilindra
- Vodila ventilov
- Vztrajnik-1
- Zaščitni pokrov zobatega jermena
- Nosilec motorja
- Tesnilne mase
- Izpušni sistem in orodje
- Oljna kad
- Vakuum črpalka
- Sesalna veja
- Izpušni kolektor
- Zobnik na razdelilni gredi
- Komplet zobatega jermena
- Črpalka za vodo
- Napenjalec zobatega jermena
- Zobati jermen
- Komplet rebrastega jermena
- Usmerjevalno - vodilni ležaj zobatega jermena
- Napenjalec rebrastega jermena
- Rebrasti jermen
- Klinasti jermen
- Jermenica alternatorja
- Jermenica na ročični gredi
- Komplet razvoda verige
- Drsnik
- Napenjalec verige razvoda
- Veriga razvoda
- Pokrov na bregasti osi
- Veriga črpalke za olje
- Napenjalec verige črpalke za olje
- Sekundarna zračna črpalka
- Krmilni ventil odmikalne gredi
- Regulator pritiska goriva
- Ventil v sistemu črpalke dodatnega zraka
- Ventil v sistemu napajanja z gorivom
- Cev polnilnega zraka
- EGR/AGR
- Hladilnik EGR-a
- Pretvornik navora
- Nastavitev odmikalne gredi
- Servis avtomatskega menjalnika
- Usmerjevalno - vodilni ležaj mikro jermena
- Cevovod za olje polnilnika
- Oddušnik ohišja motorja
- Šipka za merjenje olja
- Hidravlična cev na krmiljenju
- Gibka cev za višek goriva
- Sesalna cev
- Zavorni disk
- Disk ploščice
- Orodje za ploščice
- Zavorne čeljusti
- Komplet za reparacijo zavorne čeljusti
- ABS prstan, ABS senzor
- Zavorni bobni
- Zavorne obloge (pakne)
- Zadnji zavorni cilinder
- Orodje za zavorne obloge (pakne)
- Komplet (pakne + cilinder)
- Glavni zavorni cilinder
- Ojačevalec/regulator zavore
- Zavorna tekočina
- Zavorne cevi
- Vakuum črpalka
- Zaščitna pločevina
- Zajle ročne zavore
- Senzor obrabe zavornih ploščic
- Kompresor
- Kondenzator
- Izparilnik
- Razvlažilnik zraka
- Ventili
- Elektromagnetna spojka
- Stikalo
- Senzorji
- Hladilnik motorja
- Črpalka za vodo
- Termostat
- Termostikalo
- Cevi hlajenja motorja in prirobnice
- Ventilator hladilnika
- Spojka ventilatorja
- Grelnik kabine
- Hladilnik olja
- Hladilnik zraka - intercooler
- Ekspanzijska posoda
- Električna vodna črpalka
- Upor ventilatorja notranjega prostora
- Ventil za regulacijo hladilnega sredstva
- Ventilator notranjega prostora
- Knock senzor
- Senzor nivoja hladilne tekočine
- ABS senzor
- Lopute plina
- EGR/AGR
- Pretvorniki tlaka
- Motorček za prosti tek
- Visokotlačna črpalka
- Deli visokotlačnega vbrizgavanja
- Šoba/injektor
- Ventil regulacije CR
- Črpalka za gorivo
- Turbina
- Cev turbine
- Orodje za turbino
- Merilec pretoka mase zraka
- Lambda senzor
- Senzor položaja motorja
- Senzor pritiska sesalnega zraka
- Senzor pritiska izpušnih plinov
- Senzor temperature sesalnega zraka
- Senzor temperature izpušnih plinov
- Senzor temperature (olje, gorivo, hl. tek.)
- Senzor položaja lopute plina
- Centralni magnet, nastavitev odmicne gredi
- Senzor zaloge goriva
- Senzor pritiska v pnevmatiki
- Stikalo pritiska olja
- Senzor nivoja motornega olja
- Stikalo za vžig
- Amortizer
- Vzmet
- Zračna vzmet
- Ležaj amortizerja
- Zaščitna guma amortizerja
- Čeljust/rama
- Krogla čeljusti/ramen
- Selen/dušilni blok
- Stabilizator povezave
- Stabilizator podvozja
- Krajnik
- Povezava krajnika
- Manšeta volanske letve
- Vmesni vzvod jarmovega droga
- Volanska letev
- Servo črpalka volana
- Krmilni drog
- Korigiranje previsa
- Tlačni spremnik
- Akumulatorji (za izbrano vozilo)
- Akumulatorji (seznam)
- Balast Xenon žarnice
- Vžigalna tuljava
- Vratna ključavnica
- Električna vodna črpalka
- Generator/Alternator
- Grelniki
- Kabli za svečke
- Lambda senzor
- Merilec pretoka mase zraka
- Upor ventilatorja notranjega prostora
- Parkirni senzor
- Stikalo krmilnega vzvoda
- Stikala
- Stikalo (zavorne luči)
- Stikalo utripajočih luči
- Prekidač svjetla za vožnju unatrag
- Regulator generatorja
- Releji
- Senzor položaja motorja
- Senzor pritiska izpušnih plinov
- Senzor pritiska sesalnega zraka
- Senzor zaloge goriva
- Zaganjač/Anlaser
- Svečke
- Žarnice pomožne
- Žarnice glavne
- Kompleti žarnic
- Xenon i led žarnice
- Diodni most
- Elektro-magnetno stikalo zaganjalnika
- Stikalo za aktiviranje sklopke
- Krmilni ventil ventilacijske lopute