Prikazujemo 23 rezultata

Cevi hlajenja motorja in prirobnice

CEVI HLAJENJA MOTORJA IN PRIROBNICE

NAJDENI IZDELKI

Cevi hlajenja motorja in prirobnice

MAXGEAR Cev polnilnega zraka

  • Blagovna znamka:MAXGEAR
  • Kôd motora:OM 612.981
  • Duljina [mm]:300 mm
  • Vod za hlađenje:od motora prema hladnjaku motora
  • Unutarnji promjer [mm]:41 mm, 36 mm, 14 mm
Cijena:
Sniženo:
25,00 

Na voljo

Šifra: MAX-18-0187
  • Blagovna znamka:MAXGEAR
  • Kôd motora:OM 612.981
  • Duljina [mm]:300 mm
  • Vod za hlađenje:od motora prema hladnjaku motora
  • Unutarnji promjer [mm]:41 mm, 36 mm, 14 mm

Cevi hlajenja motorja in prirobnice

Febi Gibka cev hladilnika

Gibka cev hladilnika

  • Blagovna znamka:FEBI BILSTEIN
  • Strana ugradnje:dolje
  • Kôd motora:OM 612.981
  • Duljina [mm]:300 mm
  • Unutarnji promjer [mm]:41 mm, 36 mm, 14 mm
Cijena:
Sniženo:
36,50 

Na voljo

Šifra: FEB-36781
  • Blagovna znamka:FEBI BILSTEIN
  • Strana ugradnje:dolje
  • Kôd motora:OM 612.981
  • Duljina [mm]:300 mm
  • Unutarnji promjer [mm]:41 mm, 36 mm, 14 mm
  • Vod za hlađenje:od motora prema hladnjaku motora
  • Težina [kg]:0,295 kg
  • Opće informacije:Proizvode koje isporučujemo treba koristiti samo u skladu
    na prijedviđenom upotrebom. Ugradnju sme da obavlja samo
    obučeno stručno osoblje. Proizvodi se po pravilu
    isporučuju bez uputstva za montažu.

Cevi hlajenja motorja in prirobnice

VAICO Gibka cev hladilnika

  • Blagovna znamka:VAICO
  • Kôd motora:OM 612.981
  • Materijal:Guma s tekstilnim umetkom
  • Težina [kg]:0,07 kg
  • Opće informacije:Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    , In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.

    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.

    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.

    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.

    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
Cijena:
Sniženo:
10,20 

Na voljo

Šifra: VAI-V30-3149
  • Blagovna znamka:VAICO
  • Kôd motora:OM 612.981
  • Materijal:Guma s tekstilnim umetkom
  • Težina [kg]:0,07 kg
  • Opće informacije:Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    , In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.

    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.

    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.

    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.

    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

Cevi hlajenja motorja in prirobnice

VAICO Gibka cev hladilnika

  • Blagovna znamka:VAICO
  • Materijal:Guma s tekstilnim umetkom
  • Težina [kg]:0,043 kg
  • Opće informacije:Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    , In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.

    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.

    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.

    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.

    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
Cijena:
Sniženo:
5,90 

Na voljo

Šifra: VAI-V30-3144
  • Blagovna znamka:VAICO
  • Materijal:Guma s tekstilnim umetkom
  • Težina [kg]:0,043 kg
  • Opće informacije:Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    , In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.

    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.

    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.

    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.

    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

Cevi hlajenja motorja in prirobnice

VAICO Gibka cev hladilnika

  • Blagovna znamka:VAICO
  • Strana ugradnje:dolje
  • Materijal:Guma s tekstilnim umetkom
  • Težina [kg]:0,112 kg
  • Opće informacije:Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    , In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.

    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.

    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.

    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.

    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
Cijena:
Sniženo:
11,80 

Na voljo

Šifra: VAI-V30-3145
  • Blagovna znamka:VAICO
  • Strana ugradnje:dolje
  • Materijal:Guma s tekstilnim umetkom
  • Težina [kg]:0,112 kg
  • Opće informacije:Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    , In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.

    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.

    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.

    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.

    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

Cevi hlajenja motorja in prirobnice

TRUCKTEC AUTOMOTIVE Gibka cev hladilnika

  • Blagovna znamka:TRUCKTEC AUTOMOTIVE
  • Strana ugradnje:dolje
  • za OE broj:901 501 2582
  • Materijal:EPDM (etilen-propilen-dien kaučuk)
Cijena:
Sniženo:
23,90 

Na voljo

Šifra: TRA-02.40.128
  • Blagovna znamka:TRUCKTEC AUTOMOTIVE
  • Strana ugradnje:dolje
  • za OE broj:901 501 2582
  • Materijal:EPDM (etilen-propilen-dien kaučuk)

Cevi hlajenja motorja in prirobnice

TOPRAN Gibka cev hladilnika

  • Blagovna znamka:TOPRAN
  • Strana ugradnje:Hladnjak motora, desno dolje
  • Materijal:Guma s tekstilnim umetkom
  • Izvedba crijeva:Oblikovano crijevo
  • Opće informacije:Any and all spare parts we supply are solely intended for
    the designated purpose as defined by us.
    Installation by trained personnel only.
    Our products are usually supplied without assembly
    instructions.
    Installation in vehicles other than those specified by
    us may lead to the exclusion of warranty.
Cijena:
Sniženo:
36,80 

Na voljo

Šifra: TOP-408 130
  • Blagovna znamka:TOPRAN
  • Strana ugradnje:Hladnjak motora, desno dolje
  • Materijal:Guma s tekstilnim umetkom
  • Izvedba crijeva:Oblikovano crijevo
  • Opće informacije:Any and all spare parts we supply are solely intended for
    the designated purpose as defined by us.
    Installation by trained personnel only.
    Our products are usually supplied without assembly
    instructions.
    Installation in vehicles other than those specified by
    us may lead to the exclusion of warranty.

Cevi hlajenja motorja in prirobnice

SASIC Gibka cev hladilnika

  • Blagovna znamka:SASIC
  • Strana ugradnje:desno gore
  • Vod za hlađenje:od spojne cijevi prema hladnjaku motora
  • za OE broj:9015012782
Cijena:
Sniženo:
30,80 

Na voljo

Šifra: SAS-3406321
  • Blagovna znamka:SASIC
  • Strana ugradnje:desno gore
  • Vod za hlađenje:od spojne cijevi prema hladnjaku motora
  • za OE broj:9015012782

Cevi hlajenja motorja in prirobnice

MEYLE Gibka cev hladilnika

  • Blagovna znamka:MEYLE
  • Strana ugradnje:gore
  • Oprema vozila:za vozila s klima-uređajem
  • Materijal:EPDM (etilen-propilen-dien kaučuk)
  • Dopunski artikl/dopunska informacija 2:bez obujmica
Cijena:
Sniženo:
24,70 

Na voljo

Šifra: MEY-039 050 0003
  • Blagovna znamka:MEYLE
  • Strana ugradnje:gore
  • Oprema vozila:za vozila s klima-uređajem
  • Materijal:EPDM (etilen-propilen-dien kaučuk)
  • Dopunski artikl/dopunska informacija 2:bez obujmica

Cevi hlajenja motorja in prirobnice

MEYLE Gibka cev hladilnika

  • Blagovna znamka:MEYLE
  • Materijal:EPDM (etilen-propilen-dien kaučuk)
  • Vod za hlađenje:od hladnjaka ulja prema cilindarskom bloku
  • Dopunski artikl/dopunska informacija 2:bez obujmica
Cijena:
Sniženo:
17,00 

Na voljo

Šifra: MEY-019 222 0020
  • Blagovna znamka:MEYLE
  • Materijal:EPDM (etilen-propilen-dien kaučuk)
  • Vod za hlađenje:od hladnjaka ulja prema cilindarskom bloku
  • Dopunski artikl/dopunska informacija 2:bez obujmica

Cevi hlajenja motorja in prirobnice

GATES Gibka cev hladilnika

  • Blagovna znamka:GATES
  • Strana ugradnje:gore
  • Kôd motora:612981, 647981
  • Broj šasije (VIN) do:R337626
  • Odvajanje bloka:
Cijena:
Sniženo:
25,40 

Na voljo

Šifra: GAT-05-2543
  • Blagovna znamka:GATES
  • Strana ugradnje:gore
  • Kôd motora:612981, 647981
  • Broj šasije (VIN) do:R337626
  • Odvajanje bloka:
  • Materijal:EPDM (etilen-propilen-dien kaučuk)
  • Boja:crna
  • Duljina crijeva [mm]:409 mm
  • Unutarnji promjer 1 [mm]:37 mm
  • Unutarnji promjer 2 [mm]:41 mm
  • Obratite pozornost na brošuru:

Cevi hlajenja motorja in prirobnice

GATES Gibka cev hladilnika

  • Blagovna znamka:GATES
  • Strana ugradnje:dolje
  • Kôd motora:612981
  • Broj šasije (VIN) do:R337626
  • Vod za hlađenje:od spojne cijevi prema hladnjaku motora
Cijena:
Sniženo:
26,60 

Na voljo

Šifra: GAT-05-2505
  • Blagovna znamka:GATES
  • Strana ugradnje:dolje
  • Kôd motora:612981
  • Broj šasije (VIN) do:R337626
  • Vod za hlađenje:od spojne cijevi prema hladnjaku motora
  • Materijal:EPDM (etilen-propilen-dien kaučuk)
  • Boja:crna
  • Duljina crijeva [mm]:356 mm
  • Unutarnji promjer 1 [mm]:41 mm
  • Unutarnji promjer 2 [mm]:37 mm
  • Unutarnji promjer 3 [mm]:14 mm
  • Obratite pozornost na brošuru:

Cevi hlajenja motorja in prirobnice

GATES Gibka cev za gretje

  • Blagovna znamka:GATES
  • Vod za hlađenje:Motor iza hladnjaka za grijanje
  • Materijal:EPDM (etilen-propilen-dien kaučuk)
  • Boja:crna
  • Duljina crijeva [mm]:220 mm
Cijena:
Sniženo:
10,00 

Na voljo

Šifra: GAT-02-1620
  • Blagovna znamka:GATES
  • Vod za hlađenje:Motor iza hladnjaka za grijanje
  • Materijal:EPDM (etilen-propilen-dien kaučuk)
  • Boja:crna
  • Duljina crijeva [mm]:220 mm
  • Unutarnji promjer 1 [mm]:23,5 mm
  • Unutarnji promjer 2 [mm]:17,5 mm
  • Obratite pozornost na brošuru:

Cevi hlajenja motorja in prirobnice

GATES Gibka cev za gretje

  • Blagovna znamka:GATES
  • Vod za hlađenje:od hladnjaka za grijanje prema motoru, od hladnjaka za grijanje prema pumpi za vodu
  • Materijal:EPDM (etilen-propilen-dien kaučuk)
  • Boja:crna
  • Duljina crijeva [mm]:130 mm
Cijena:
Sniženo:
6,90 

Na voljo

Šifra: GAT-02-1612
  • Blagovna znamka:GATES
  • Vod za hlađenje:od hladnjaka za grijanje prema motoru, od hladnjaka za grijanje prema pumpi za vodu
  • Materijal:EPDM (etilen-propilen-dien kaučuk)
  • Boja:crna
  • Duljina crijeva [mm]:130 mm
  • Unutarnji promjer 1 [mm]:16 mm
  • Unutarnji promjer 2 [mm]:23 mm
  • Obratite pozornost na brošuru:

Cevi hlajenja motorja in prirobnice

Febi Gibka cev hladilnika

Gibka cev hladilnika

  • Blagovna znamka:FEBI BILSTEIN
  • Kôd motora:OM 612.981
  • Unutarnji promjer [mm]:17 mm
  • Vod za hlađenje:od hladnjaka ulja prema cilindarskom bloku
  • Unutarnji promjer 1 [mm]:24 mm
Cijena:
Sniženo:
15,20 

Na voljo

Šifra: FEB-46551
  • Blagovna znamka:FEBI BILSTEIN
  • Kôd motora:OM 612.981
  • Unutarnji promjer [mm]:17 mm
  • Vod za hlađenje:od hladnjaka ulja prema cilindarskom bloku
  • Unutarnji promjer 1 [mm]:24 mm
  • Težina [kg]:0,077 kg
  • Opće informacije:Proizvode koje isporučujemo treba koristiti samo u skladu
    na prijedviđenom upotrebom. Ugradnju sme da obavlja samo
    obučeno stručno osoblje. Proizvodi se po pravilu
    isporučuju bez uputstva za montažu.

Cevi hlajenja motorja in prirobnice

Febi Gibka cev hladilnika

Gibka cev hladilnika

  • Blagovna znamka:FEBI BILSTEIN
  • Kôd motora:OM 612.981
  • Vod za hlađenje:od hladnjaka za grijanje prema pumpi za vodu
  • Unutarnji promjer 1 [mm]:23 mm
  • Težina [kg]:0,035 kg
Cijena:
Sniženo:
13,00 

Na voljo

Šifra: FEB-38965
  • Blagovna znamka:FEBI BILSTEIN
  • Kôd motora:OM 612.981
  • Vod za hlađenje:od hladnjaka za grijanje prema pumpi za vodu
  • Unutarnji promjer 1 [mm]:23 mm
  • Težina [kg]:0,035 kg
  • Unutarnji promjer 2 [mm]:16 mm
  • Opće informacije:Proizvode koje isporučujemo treba koristiti samo u skladu
    na prijedviđenom upotrebom. Ugradnju sme da obavlja samo
    obučeno stručno osoblje. Proizvodi se po pravilu
    isporučuju bez uputstva za montažu.
KATEGORIJE IZDELKOV
[]
1 Step 1

Pošlji poizvedbo

Ime in priimek
telefon
Komentar
0 / 200


Previous
Next
FormCraft - WordPress form builder