ČEP KORITA OLJA

Izbrano vozilo

Prikazani so rezultati za izbrano vozilo

NAJDENI IZDELKI

Hiter pogled

Podrobnosti ...

Čep korita olja

OE del za VAG, Zapiralni čep, oljna kad

Blagovna znamka:Original VAG
Profil glave vijka/matice:Vanjski šesterokut
Veličina ključa:19
Vanjski navoj [mm]:M14 x 1,5 mm
Duljina [mm]:22 mm

Podrobnosti ...

-34%

Trenutna akcija traje do: 28.04.2024 00:00.

Cijena:

13,40 €

Sniženo:

8,84 €

Šifra: OE-N90813202

Najniža cijena u zadnjih 30 dana: 8,84 €

Blagovna znamka:Original VAG
Profil glave vijka/matice:Vanjski šesterokut
Veličina ključa:19
Vanjski navoj [mm]:M14 x 1,5 mm
Duljina [mm]:22 mm
Dopunski artikl/dopunska informacija:s brtvom
Opće informacije:Our products are usually delivered without installation
instructions. Installation may only be carried out by
trained specialist technicians. Products supplied by us are
exclusively intended for proper and appropriate use. The
warranty is void in the event of improper, contrary to the
intended purpose or unsuitable application or use.

For electronic items that leave fault memory entries, it is
essential to submit fault memory logs in the event of a
claim. This consequently concerns all electronic items that
are detected, monitored and controlled by the engine control
unit, such as sensors of all kinds (e.g. NOX sensors, ABS
sensors), mass airflow sensors, airbag slip rings, headlamp
levelling control units, throttle valves, lambda sensors or
EGR modules.

If you encounter difficulties during a repair
(troubleshooting max. 1 hr.), please contact technical
support at:

Phone: 040 - 25 30 66 55
Email: service@aic-germany.de

This often avoids extensive troubleshooting that is
disproportionate to normal repair times.

The following applies to complaints: The more complete the
processes are submitted, the faster they can be processed.

Complete documentation includes the warranty application
(incl. KBA no., chassis no., first registration, engine
code, mileage), first and second installation invoice, fault
memory log, guided troubleshooting and, if applicable,
pictures. Incomplete documentation may result in rejection
of the claim.

Hiter pogled

Podrobnosti ...

Čep korita olja

TOPRAN Čep, oljna kad

Blagovna znamka:TOPRAN
Izvedba vijka/matice:s prigrađenom podložnom pločicom
Dimenzija navoja:M 14
Duljina navoja [mm]:22 mm
Korak navoja [mm]:1,5 mm

Podrobnosti ...

-34%

Trenutna akcija traje do: 28.04.2024 00:00.

Cijena:

3,40 €

Sniženo:

2,24 €

Šifra: TOP-109 035

Najniža cijena u zadnjih 30 dana: 2,24 €

Blagovna znamka:TOPRAN
Izvedba vijka/matice:s prigrađenom podložnom pločicom
Dimenzija navoja:M 14
Duljina navoja [mm]:22 mm
Korak navoja [mm]:1,5 mm
Ukupna duljina [mm]:30 mm
Materijal:Čelik
Površina:prevučeno slojem cinka i nikla
Profil glave vijka/matice:Vanjski šesterokut
Veličina ključa:19
Opće informacije:Any and all spare parts we supply are solely intended for
the designated purpose as defined by us.
Installation by trained personnel only.
Our products are usually supplied without assembly
instructions.
Installation in vehicles other than those specified by
us may lead to the exclusion of warranty.

Hiter pogled

Podrobnosti ...

Čep korita olja

ELRING Čep, oljna kad

Blagovna znamka:ELRING
Dimenzija navoja:M14x1,5x22
Profil glave vijka/matice:Vanjski šesterokut
Veličina ključa:19 mm
alternativni komplet za popravak:505.540

Podrobnosti ...

-34%

Trenutna akcija traje do: 28.04.2024 00:00.

Cijena:

5,60 €

Sniženo:

3,70 €

Šifra: ELR-567.640

Najniža cijena u zadnjih 30 dana: 3,70 €

Blagovna znamka:ELRING
Dimenzija navoja:M14x1,5x22
Profil glave vijka/matice:Vanjski šesterokut
Veličina ključa:19 mm
alternativni komplet za popravak:505.540
Dopunski artikl/dopunska informacija 2:s brtvenim prstenom

Hiter pogled

Podrobnosti ...

Čep korita olja

VAICO Pokrov korita olja

Blagovna znamka:VAICO
Strana ugradnje:na strani motora
Vanjski navoj [mm]:M14 x 1,5 mm
Dopunski artikl/dopunska informacija 2:s brtvenim prstenom
Duljina [mm]:29,5 mm

Podrobnosti ...

-34%

Trenutna akcija traje do: 28.04.2024 00:00.

Cijena:

6,90 €

Sniženo:

4,55 €

Šifra: VAI-V10-0885

Najniža cijena u zadnjih 30 dana: 4,55 €

Blagovna znamka:VAICO
Strana ugradnje:na strani motora
Vanjski navoj [mm]:M14 x 1,5 mm
Dopunski artikl/dopunska informacija 2:s brtvenim prstenom
Duljina [mm]:29,5 mm
Dimenzija navoja:M14 x 1,5
Veličina ključa:19
Profil glave vijka/matice:Vanjski šesterokut
Površina:prevučeno slojem cinka i nikla
Izvedba vijka/matice:s prigrađenom podložnom pločicom
Duljina navoja [mm]:22 mm
potreban broj komada:1
Materijal:Čelik
Korak navoja [mm]:1,5 mm
za OE broj:N 908 132 02
Težina [kg]:0,0637 kg
Opće informacije:Products supplied by us are without exception intended for
the designated use.
Please note that our products are usually delivered without
installation instructions.
Installation may only be carried out by trained specialist
personnel.
There is no guarantee for inappropriate, improper or
unintended use.
, In the warranty, we always make a distinction between wear
parts and vehicle parts. All wear parts are subject to a
reduced warranty period and a maximum mileage.

Brake components such as brake disks, brake pads, etc.
maximum of 1000 km (break-in period). Therefore, warranty
claims for brake parts are only reviewed with an
installation invoice and a record of the wheel hub run-out
measurement, including photos.

For brake disks and brake pads, the break-in requirements
specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be
checked with regard to clearance and the wheel hub with
regard to wobble, and the appropriate documentation must be
produced.

If the vehicle is no longer in its original condition due to
tuning work such as wheel accessories and tracking plates,
the entitlement to make warranty claims is lost due to
third-party work. The same warranty claims are lost if the
vehicle is used for motor sports or similar events.

Hiter pogled

Podrobnosti ...

Čep korita olja

VAICO Zapiralni čep, oljna kad

Blagovna znamka:VAICO
Strana ugradnje:na strani motora
Vanjski navoj [mm]:M14 x 1,5 mm
potreban broj komada:1
Profil glave vijka/matice:Unutarnji šesterokut

Podrobnosti ...

-34%

Trenutna akcija traje do: 28.04.2024 00:00.

Cijena:

6,20 €

Sniženo:

4,09 €

Šifra: VAI-V10-3306

Najniža cijena u zadnjih 30 dana: 4,09 €

Blagovna znamka:VAICO
Strana ugradnje:na strani motora
Vanjski navoj [mm]:M14 x 1,5 mm
potreban broj komada:1
Profil glave vijka/matice:Unutarnji šesterokut
Korak navoja [mm]:1,5 mm
za OE broj:N 016 027 6
Dimenzija navoja:M14 x 1,5
Izvedba vijka/matice:Ravna glava
Materijal:Čelik
Duljina navoja [mm]:12 mm
Dopunski artikl/dopunska informacija 2:s brtvenim prstenom
Težina [kg]:0,018 kg
Opće informacije:Products supplied by us are without exception intended for
the designated use.
Please note that our products are usually delivered without
installation instructions.
Installation may only be carried out by trained specialist
personnel.
There is no guarantee for inappropriate, improper or
unintended use.
, In the warranty, we always make a distinction between wear
parts and vehicle parts. All wear parts are subject to a
reduced warranty period and a maximum mileage.

Brake components such as brake disks, brake pads, etc.
maximum of 1000 km (break-in period). Therefore, warranty
claims for brake parts are only reviewed with an
installation invoice and a record of the wheel hub run-out
measurement, including photos.

For brake disks and brake pads, the break-in requirements
specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be
checked with regard to clearance and the wheel hub with
regard to wobble, and the appropriate documentation must be
produced.

If the vehicle is no longer in its original condition due to
tuning work such as wheel accessories and tracking plates,
the entitlement to make warranty claims is lost due to
third-party work. The same warranty claims are lost if the
vehicle is used for motor sports or similar events.